ADATA XPG Sage PCIe 4.0 SSD

ADATA XPG Sage PCIe 4.0 SSD reaches read speed of 7 GB/s

During the CES 2020, ADATA introduced the XPG Sage PCIe 4.0 SSD, which uses the Innogrit Rainier controller (IG5236). The above controller can support up to 16TB of storage and use an eight-channel interface.

[td_block_ad_box spot_id=”custom_ad_2″]

Although Innogrit is an unfamiliar name (compared to Phison’s most commonly used controllers), the performance it offers is at a high level. The ADATA CrystalDisk benchmark shows sequential read and write performance of 7.2 GB/sec and close to 5.4 GB/sec for XPS Sage.

According to the Tom’s Hardware site, which was able to test the XPG Sage, ADATA also highlights random IOPS speeds of 1,000,000 and 800,000 for data read and write, respectively. Additionally, it is suggested that sequential speeds of 6 GB/sec can be easily achieved with some firmware changes before SSDs go into mass production.

Other features of the SSD ADATA XPG Sage PCIe 4.0 SSD include 4GB of DRAM cache, integrated heat conductors, and SSDs up to 4TB capacity. It is expected that the XPG Sage will not be released before June.

> Read Next: MediaTek Dimensity 800 5G chipset for mid-range phones officially announced

So what do you think about this? Let us know your thoughts in the comments section below, follow us on twitter and facebook for more news and updates.

neoAdviser

[td_block_11 category_id=”3″ limit=”1″ td_filter_default_txt=”” tdc_css=””][td_block_ad_box spot_id=”custom_ad_3″ tdc_css=””]